The Ford Ranger exterior door handle is a single piece that locks the door to keep it secure. It has several moving parts that can wear out over time, making your Ford Ranger inoperable. If your vehicle’s exterior door handle is sticking and not opening your door, it needs to be replaced right away before further damage occurs. Here’s what you need to know about repairing or replacing this essential part of your truck.
What Is A Ford Exterior Door Handle?
In simple terms, the exterior door handle is a single piece that locks and secures the door. It’s made of plastic and metal, attached to both sides of your car’s exterior body panels by screws or rivets (or other methods).
The exterior door handle connects directly to interior parts like handles and locks, which allow you access into your vehicle from outside. Because these pieces are connected by one long rod-like object, it allows them all to work together seamlessly when opening or locking your car doors! The exterior handle also helps keep intruders out by making them more difficult for thieves to reach without breaking glass windows first—but don’t worry about this happening because we’ve got you covered with our wide selection of replacement parts such as new Ford Exterior Door Handles!
Why Does A Door Handle Stick?
The Ford Ranger door handles are durable and long-lasting. However, over time, they can get worn out or damaged by the elements. It’s important to know what causes a door handle to stick so that you can fix the problem before it becomes more serious.
The most common reason that a Ford exterior door handle sticks is because it’s not properly lubricated or aligned. This means that there isn’t enough grease in between moving parts of your exterior door handle, causing them to grind against each other when you try opening or closing your doors. You’ll know if this is happening because there will be an audible clicking sound when opening or closing your doors from inside the cabin of your vehicle—and possibly even from outside as well!
Another cause could simply be loose screws holding together various pieces of metal within each individual piece itself (this includes both interior AND exterior ones). If this happens often enough over time, then eventually one day these screws may get pulled out completely, causing everything else connected with those two pieces.
How To Fix Your Ford Ranger Door Handle
The first thing you’ll need to do is remove the door panel of your Ford Ranger. It can be done by removing all the screws holding it in place and pulling out on the bottom of the panel to remove it from its keeping clips.
Once you have removed your old exterior door handle, install your new one by following these steps:
- Insert a screwdriver into each side of your new exterior handle and pry up on them until they pop out of their respective holes in each side of the door frame (this may take some force).
- Place a towel over top of both holes so that when you push down on them again later with another pair of pliers or vice grips (the latter being preferable), no debris falls into them from above where there was once an old exterior handle installed before yours came along.
- Hand tighten two screws through each hole until they’re snug against plastic bumpers at either end; then use some WD40 spray lubricant if needed before installing any additional hardware such as nuts/bolts onto those same areas because whatever happens here next will require plenty more torque than just hand tightening alone would provide.
If Your Ford Ranger Door Handle Is Sticking, It’s Time To Replace It
If your Ford Ranger door handle is sticking, it’s time to replace it. This is an easy repair that can be done in less than 30 minutes. You’ll need a set of new exterior door handles and some tools like a screwdriver or socket wrench.
To remove the old exterior door handle:
- Using a flathead screwdriver, pry off the plastic cap covering the screws on the backside of your truck’s door handle assembly. Remove these screws using either a socket wrench or Phillips head screwdriver depending on what kind they are (you may also want to use pliers). This will allow you access inside where there are two more screws holding everything together—remove them as well! Once all four screws have been removed from both sides of your truck’s door handle assembly (two inside and two outside), pull gently on one side while applying pressure downwards towards yourself until it comes free from its casing; then repeat this process with each side until all three pieces have been disconnected from one another.
Ford Ranger Exterior Door Handle Replacement
Ford Ranger exterior door handle replacement is a very easy repair, but it’s important to take your time and make sure that you do it right.
First, remove the old door handle by unscrewing the two Phillips-head screws on either side of it with a screwdriver. Next, pull off any plastic pieces that may still be attached to the latch (they should come off easily), then grab hold of both sides of the latch mechanism and pull upward until it separates from its housing inside the door frame.
Once it is done, test whether your new handle fits into place correctly if not, try another one until you find one that fits correctly. Finally, put everything back together again in reverse order: put in both sides first; then slip them into place inside their respective holes in front; finally tighten down those two Phillips-head screws again before testing out all functions (hinge movement, etc).
The Exterior Door Handle Is A Single Piece That Locks The Door To Keep It Secure
The exterior door handle is a single piece that locks the door to keep it secure. The exterior door handle is the part that you used to open and close the door, so it’s important to know how they work in case your Ford Ranger needs repairs or maintenance.
The Ford exterior door handle works by using springs to push against the latch assembly when you turn it toward yourself (toward your body). This causes pressure on both sides of the assembly, keeping it locked into place before releasing once you’ve opened up enough space between them so that they can come apart again without causing damage or breaking down prematurely due to overuse during regular use and heavy duty tasks like driving through mud puddles or snow drifts while off roading at high speeds!
Conclusion
The exterior door handle is a single piece that locks the door to keep it secure. If your Ford Ranger’s exterior door handle is sticking or broken, then it’s time to replace it with a new one! We have everything from replacement handles to mirror covers at great prices so that you can get back on the road safely without breaking the bank.
Related Websites:
Articles on Blogshunt
Articles on tbablogs
Articles on Blogspeoples
Articles on unrealblogs
Articles on Allcityforums
